Saturday, December 3

The Beginning: First Steps in Crafting a New Game

My games design process starts with a spark of an idea, either theme, mechanics or a combination of the two. This usual sets my head to buzzing with a whole raft of ideas, from mechanics, artwork, market segments, and the inevitable riches that will follow from the million copies sales it is bound to achieve. At this stage I have to ride the wave of unrealistic optimism and get as many of the ideas down as possible before I forget them all. In the past this means getting to a notebook as fast as possible and just dumping all my thoughts onto paper. These thoughts will mostly be theme and mechanics ideas, with maybe a mission statement for the game describing which sector of the market I'm aiming for, target play time, etc.

Recently I've started using a draft email to myself as a virtual notebook that I can access from anywhere I've got internet access, without having to remember to cart the notebook around with me. I've found this really useful, but it has it's strengths and weaknesses like anything else. It's quick to use, and very portable, and also allows editing as your ideas change over time. The downside is that sketching images of design ideas, card layouts, tile distributions, etc. is much slower than scribbling something quickly with a pencil.

The ideas keep coming and the game will evolve pretty quickly at that stage with everything potentially open to change. Over a few days I get enough down (and have enough ideas) to begin the prototyping journey. I've a lot more ideas down on paper than prototypes - lots of these ideas fail at the first hurdle as I come to the conclusion that they won't work, won't be fun or just lose interest in them. After the first year or so of running Reiver Games I went off games design, aiming instead to position the company as an independent publisher of games by other designers. For some reason, I'm back in the designing mood.

If the game keeps my interest enough to make it off the paper of my notebook, the next stage is to make a paper prototype. The early prototypes are just something that you can play (probably by yourself) to work out the worst of the kinks. There will be loads of them and at this early stage everything is still changing constantly, so you want to make something that's playable but doesn't require too much effort to construct. Normally I do this all with pencil and paper. I take sheets of A4 paper (similar in size to US letter I think) and literally tear them down to size. Cards are a sheet folded into 16ths or 32nds, player boards might be a sheet folded in half (i.e. A5), a game board might be two sheets taped together (or a sheet of A3). There's no artwork, just enough text/iconography drawn on with a pencil to be playable. I use pencil rather than pen as I fully expect to be rubbing things out and then re-drawing/writing them after every test game. Using paper for cards is definitely sub-optimal from a play point of view (they are very hard to shuffle!) but this version isn't really intended to be played by anyone other than me, and rather than spending tens of hours cutting out and making pretty card ones, it's more important at this stage to make sure this early game idea actually works enough to play with other people (which is when the real playtesting begins).

The game I'm working on at the moment (Codename: Vacuum) is a card game in the Dominion vein, i.e. it has hundreds of cards. I started making a starter set of cards a few weeks ago and got to just about enough to start testing it to see if the basic premise works before I came down with a filthy cold and then we had Christmas. I'm back home again and I'm already thinking of changing up my process for this game.

Folding and tearing all the cards, then drawing on them the basic layout is a lot of work when you do it hundreds of times. To add the fact that this version is almost unplayable in terms of shuffling is making me think of cutting to the chase and making the Phase II prototype straight away. Or at least Phase 1.5. This would be made out of craft card (about 220 gsm) and be partially printed with a basic card layout to reduce some of the drawing drudgery. I'd still leave the game without any artwork and write the game text in pencil to make it easy to change as I work out the strengths and weaknesses of the various cards.

I still have the Adobe InDesign software I bought for Reiver Games, so I can use that to quickly knock up the card outlines and cutting guides, print those out and then fill in the text with pencil afterwards. I also got an A3 inkjet printer that was capable of printing on card - specifically for printing prototypes - so I'll be able to print them at home too. I've got three days before I have to go back to work - time to get cracking!

What is your process? What steps do your designs go through? What tools do you recommend?

7 comments:

Steve said...

Why don't you just get some cheap packs of playing cards and scribble on them? You'd have to get non-laminated ones anyway (to be able to write on them in pencil) so it would only cost a pound or two at the outside and save you loads of effort.

It would also save loads of paper!

Seth Jaffee said...

I've found that for prototyping cards what works for me is to make the cards on my computer (I have an old copy of Pagemaker, I'm sure your InDesign would work even better) and print onto 110lb cardstock. 110lb is heavier than paper stock, but any standard printer can handle it. This is standard stuff I get at Office Depot or wherever, I'm certain they'll have the equivalent somewhere on your side of the pond.

After printing (9 cards to a sheet for standard poker size 2.5"x3.5" cards), you can use them straight away, but shuffling's a little annoying, and you can kinda see through them - I usually use opaque backed sleeves (Ultra Pro or the like - what people use for Magic: the Gathering).

I highly recommend spending a little time with google image search to add a little bit of graphics to the cards - they don't have to look GOOD, but playing the game will be easier if all the cards don't look the same - this is especially important when trying to get people to play your prototype. If all your cards are white with words written in pencil, it is a harder sell in the first place, and people will not understand the game as easily, and will likely enjoy it less.

It doesn't take much to make a fairly decent looking prototype that's easy to play with, and I think it's well worth the effort.

As for tiles, I find that printing to card stock and affixing to chipboard (I use the backs from used up pads of paper) to make very nice tiles. Some people use cereal boxes, but I prefer the thicker chipboard I use. I have a Xyron cold laminator which cost me something like $80USD (though that might have been on sale) - it can take Adhesive or Laminate cartridges (each about $25USD) and I find it very useful for prototyping. You can probably find one at your local craft store.

Jack said...

Hiya Steve,

I think I'd struggle to see anything that was written over playing cards (especially as Codename: Vacuum has a bunch of stuff that needs to go on each card), one way round that is to glue a piece of plain paper over the card face, but I've received several prototypes like that when I ran Reiver Games and they were awkward to shuffle.

Hiya Seth,

Good to hear from you again, and nice work on Eminent Domain - The Wife and I are thoroughly enjoying it and it got a lot of play over Christmas!

While I agree with all your points, for this first playable prototype I want something that I can play with a small set of friends (who don't care about presentation) that costs little in time and effort to make and takes minimal effort to change as the game inevitably evolves. Assuming I can get the game to a point where I'm fairly happy with it, then I'll make a prototype like you suggest for taking to conventions and sending out to remote playtest groups.

The only thing I disagree with card sleeves, not sure why but I have a totally unreasonable hatred of card sleeves!

Cheers,

Jack

Philip said...

I do something similar to what Seth does. The advantage for me is that I can change the cards very quickly in the computer and print them again. I find this far easier (and better quality) than scribbling on paper.

For me, adding non-game-essential art is Phase II stuff (when other people will be playing it).

Happy New Year!

Jack said...

Hiya Philip,

Happy New Year to you too!

Well, with this game I'm leaning in that direction too, but it will be half computer drawn and half pencil with no art at all. Hopefully I'll get it to a stage I'm fairly happy with quickly and then I can include some art.

Cheers,

Jack

without significance said...

When I did my first playtest run, I had the basic card layout in Illustrator saved to a flash drive. A trip to Kinkos later, I had my first playtest kit. I sleeved and backed them in old Magic cards. DEFINITELY get placeholder art. Visual difference makes a HUGE difference in playtesting. I'm enjoying your blog though! Come see mine if you like

http://clevergamereference.wordpress.com

Jack said...

Hiya WS,

I've a bunch of kit left over from running Reiver Games (an A3 colour printer which can print on card stock, a corner rounding tool, craft knives, cutting mat and steel ruler), so I can (once I've finished faffing with the iconography) quickly make cards on the computer and print them at home. Before I start testing the game on strangers, I'll definitely add some art, but at this stage (just with friends and my RG playtesting crew) it's a wasted effort - the cards will be going in the bin fairly often and these guys know that the art will follow.

Cheers,

Jack

P.S. Adding you to my blogroll.