Monday, April 24

Hand-Crafting Games

So I mentioned in my last post that I'm thinking of making hand-made games again. It's been a long time since I properly made hand-made games, so I thought I'd post on how I go about hand-crafting a game.

It starts by getting the cards professionally printed in a 5x5 grid on a sheet of A3 card. I get the printers to professionally laminate the sheets too, so each side is covered in an incredibly thin layer of plastic that gives the cards a nice smooth finish and protects the ink from damp fingers and wear. These sheets look like this (note the crosshairs at the corners of each card):

The sheet ready to be cut

Before I can move to the next stage I need some tools - I use a craft knife with snap off blades and steel ruler (I've just bought a new ruler - a Maped Linea shown in the picture below about which I am very excited!) to cut out the cards. Although it's more work than a guillotine, I find it give me more precision, and doesn't kink the edge of the cards so much. The new ruler has three benefits over my old steel rule: a clearer scale for measuring, a non-slip backing and it's longer too. Also pictured is the corner rounding tool I bought back in my Reiver Games days. It can round the corners of a pile of cards that's about a centimetre deep, so you can quickly get through an entire deck.

Tools of the trade

With trusty craft knife and steel ruler in hand I use the crosshairs in the corners of the cards to cut the A3 sheet into five strips of five cards:

Into strips

At this point I can still see half of the crosshairs, so I've still got guides to cut the strips into individual cards:

Into cards

The last task then is to use the corner-rounding tool to punch off the corners, leaving me with a fairly professional-looking finished product:

Finished game

And that's how I make a hand-crafted game. There's a little more to it (making the box and the box wrappers) but I can cover that in another post.

4 comments:

GamesBook said...

Can we ask how it costs to print a laminated sheet of cards (as you describe above)?

Jackson Pope said...

Hiya Derek,

I don't have a breakdown for each component (my quotes are for the cards, rules and box labels), but it's probably ~£5/game for 30 copies and £3/game for 100 copies for the cards alone. Then there's the rules sheets, box labels, box card and box insert card on top.

Cheers,

Jack

GamesBook said...

OK, thanks. I don't necessarily want to publish a whole game but its useful to know that printing good quality cards can be done at a reasonable price. Is there at least a name for the process they use, so I can make local enquiries (I assume the cards are double-sided)?

Jackson Pope said...

Hiya Derek,

The printer refers to it as 'matt lamination'. It's a very different process to the pocket lamination that you can often do in your own office though. If you go to a digital printer they should be able to show you samples of everything they do. I'm just using a local printer who usually do posters, fliers, business cards, etc., those sorts of places exist in most cities.

Cheers,

Jack